Change Sid Windows 10 Download [EXCLUSIVE]

Change Sid Windows 10 Download [EXCLUSIVE]

LINK ---> https://blltly.com/2sXu4Z

Demand from the Windows community has lead several companies to developprograms that can change a computer's SID after a system has beencloned. However, Symantec's SID Changer andSymantec's Ghost Walker areonly sold as part of each company's high-end product. Further, they bothrun from a DOS command prompt (Altiris' changer is similar toNewSID).

The problem with cloning is that it is only supported by Microsoft in avery limited sense. Microsoft has stated that cloning systems is onlysupported if it is done before the GUI portion of Windows Setup has beenreached. When the install reaches this point the computer is assigned aname and a unique computer SID. If a system is cloned after this stepthe cloned machines will all have identical computer SIDs. Note thatjust changing the computer name or adding the computer to a differentdomain does not change the computer SID. Changing the name or domainonly changes the domain SID if the computer was previously associatedwith a domain.

NewSID is a program we developed to change a computer's SID. It firstgenerates a random SID for the computer, and proceeds to updateinstances of the existing computer SID it finds in the Registry and infile security descriptors, replacing occurrences with the new SID.NewSID requires administrative privileges to run. It has twofunctions: changing the SID, and changing the computer name.

NewSID's SID-synchronizing feature that allows you to specify that,instead of randomly generating one, the new SID should be obtained froma different computer. This functionality makes it possible to move aBackup Domain Controller (BDC) to a new Domain, since a BDC'srelationship to a Domain is identified by it having the same computerSID as the other Domain Controllers (DCs). Simply choose the"Synchronize SID" button and enter the target computer's name. You musthave permissions to change the security settings of the targetcomputer's Registry keys, which typically means that you must be loggedin as a domain administrator to use this feature.

Important: Note that while we have thoroughly tested NewSID, youmust use it at your own risk. As with any software that changes file andRegistry settings, it is highly recommended that you completely back-upyour computer before running NewSID.

Finally, NewSID must update the ProfileList subkeys to refer tothe new account SIDs. This step is necessary to have Windows NTcorrectly associate profiles with the user accounts after the accountSIDs are changed to reflect the new computer SID.

Deploying Windows 11 to hundreds or even thousands of devices can be automated if you have a system image that you can clone. To create an image for cloning, you first install Windows 11 on a device or virtual machine (VM), and then configure the operating system to your requirements. For example, you might decide to install certain applications or change default Windows configuration settings.

Viewed 100K+ times! This question is You Asked Hi Tom,A trivia question for you, what is SID and what is it used for? Would changing it have any impact on the different instances of the database? And lastly, where can I find out the SID of my database? I don't seem to able to find it in technet.oracle.com.Please explain.Thanks GoJo. and Tom said...The SID is a site identifier. It plus the Oracle_home are hashed together in Unix to create a unique key name for attaching an SGA. If your Oracle_sid or Oracle_home is not set correctly, you'll get "oracle not available" since we cannot attach to a shared memory segment that is identified by magic key. On NT, we don't use shared memory but the SID is still important. We can have more then 1 database on the same oracle home so we need a way to id them.Changing it harder then it looks. I know you are on unix, so here are the steps for changing it (or the database name) under Unix - they are different on NT.How to find the sid -- "select instance from v$thread" will do that.PURPOSE This entry describes how to find and change the "db_name" for a database, or the ORACLE_SID for an instance, without recreating the database. SCOPE & APPLICATION For DBAs requiring to either find or change the db_name or ORACLE_SID.To find the current DB_NAME and ORACLE_SID:===========================================Query the views v$database and v$thread. V$DATABASE gives DB_NAME V$THREAD gives ORACLE_SIDIf ORACLE_SID = DB_SID and db_name = DBNAME:To find the current value of ORACLE_SID: SVRMGR> select instance from v$thread; INSTANCE ---------------- DB_SIDTo find the current value of DB_NAME: SVRMGR> select name from v$database; NAME --------- DBNAME Modifying a database to run under a new ORACLE_SID: =================================================== 1. Shutdown the instance 2. Backup all control, redo, and data files. 3. Go through the .profile, .cshrc, .login, oratab, tnsnames.ora, (for SQL*Net version 2), and redefine the ORACLE_SID environment variable to a new value. For example, search through disks and do a grep ORACLE_SID * 4. Change locations to the "dbs" directory % cd $ORACLE_HOME/dbs and rename the following files: o init.ora (or use pfile to point to the init file.) o control file(s). This is optional if you do not rename any of the controlfiles, and the control_files parameter is used. The "control_files" parameter is set in the "init.ora" file or in a file it references with the ifile parameter. Make sure that the control_files parameter does not point to old file names, if you have renamed them. o "crdb.sql" & "crdb2.sql", This is optional. These are only used at database creation. 5. Change locations to the "rdbms/admin" directory % cd $ORACLE_HOME/rdbms/admin and rename the file: o startup.sql. This is optional. On some platforms, this file may be in the "$ORACLE_HOME/rdbms/install" directory. Make sure that the contents of this file do not reference old init.ora files that have been renamed. This file simplifies the "startup exclusive" process to start your database. 6. To rename the database files and redo log files, you would follow the instructions in . 7. Change the ORACLE_SID environment variable to the new value. 8. Check in the "$ORACLE_HOME/dbs" directory to see if the password file has been enabled. If enabled, the file "orapw" will exist and a new password file for the new SID must be created (renaming the old file will not work). If "orapw" does not exist, skip to step 9. To create a new password file, issue the following command as oracle owner: orapwd file=orapw password=?? entries= 9. Start up the database and verify that it works. Once you have done this, shutdown the database and take a final backup of all control, redo, and data files. 10. When the instance is started, the control file is updated with the current ORACLE_SID. Changing the "db_name" for a Database: ====================================== 1. Login to Server Manager % svrmgrl SVRMGR> connect internal 2. Type SVRMGR> alter system switch logfile; to force a checkpoint. 3. Type SVRMGR> alter database backup controlfile to trace resetlogs; This will create a trace file containing the "CREATE CONTROLFILE" command to recreate the controlfile in its current form. 4. Shutdown the database and exit SVRMGR SVRMGR> shutdown SVRMGR> exit The database must be shutdown with SHUTDOWN NORMAL or SHUTDOWN IMMEDIATE. It must not be shutdown abnormally using SHUTDOWN ABORT. 5. Change locations to the directory where your trace files are located. They are usually in the "$ORACLE_HOME/rdbms/log" directory. If "user_dump_dest" is set in the "init.ora" file, then go to the directory listed in the "user_dump_dest" variable. The trace file will have the form "ora_NNNN.trc with NNNN being a number. 6. Get the "CREATE CONTROLFILE" command from the trace file and put it in a new file called something like "ccf.sql". 7. Edit the "ccf.sql" file FROM: CREATE CONTROLFILE REUSE DATABASE "olddbname" NORESETLOGS ... TO: CREATE CONTROLFILE set DATABASE "newdbname" RESETLOGS ... FROM: # Recovery is required if any of the datafiles are restored backups, # or if the last shutdown was not normal or immediate. RECOVER DATABASE USING BACKUP CONTROLFILE TO: # Recovery is required if any of the datafiles are restored backups, # or if the last shutdown was not normal or immediate. # RECOVER DATABASE USING BACKUP CONTROLFILE8. Save and exit the "ccf.sql" file 9. Rename the old control files for backup purposes and so that they do not exist when creating the new ones. 10. Edit the "init.ora" file so that db_name="newdb_name" . 11. Login to Server Manager % svrmgrl SVRMGR> connect internal 12. Run the "ccf.sql" script SVRMGR> @ccf This will issue a startup nomount, and then recreate the controlfile. If, at this point, you receive the error that a file needs media recovery, the database was not shutdown normally as specified in step 4. You can try recovering the database using the redo in the current logfile, by issuing: SVRMGRL> recover database using backup controlfile; This will prompt for an archived redologfile. It may be possible to open the database after applying the current logfile. BUT this is not guaranteed. If, after applying the current logfile, the database will not open then it is highly likely that the operation must be restarted having shutdown the database normally. To apply the necessary redo, you need to check the online logfiles and apply the one with the same sequence number as reported in the message. This usually is the logfile with status=CURRENT. To find a list of the online logfiles: SVRMGR> select group#, seq#, status from v$log; GROUP# SEQUENCE# STATUS ---------- --------- ---------------- 1 123 CURRENT select member from v$logfile where GROUP# = 1; Member ------------------------------------ /u02/oradata/V815/redoV81501.log The last command in ccf.sql should be: SVRMGR> alter database open resetlogs; 13. You may also need to change the global database name: alter database rename global_name to . See for further detail.14. Make sure the database is working. 15. Shutdown and backup the database. Rating (58 ratings)Is this answer out of date? If it is, please let us know via a Comment Comments Comment Ganesh, June 17, 2001 - 9:25 am UTC 2b1af7f3a8